Dixon Valve 100 TON RAM SEC06 External Swaged Ground Joint - Manual (Page 7)

100 Ton Ram Instruction Manual
Boss Ground Joint Holedall Couplings
customer service 800 • 355 • 1991
5 Section 6
Position a rubber sheet or pad under the die bed.
Slowly slide the hose towards the pusher. When the
die clears the die holder, one or both halves may fall
to the floor. If one half remains on the ferrule, tap it
with a mallet until it releases. If both halves remain
on the ferrule, it may require the halves be pried
apart at the seam.
Move the directional control lever to the “REVERSE”
position and depress the button on the remote.
Retract the cylinder until there is sufficient room for
the stem and ferrule to clear the die bed.
Wipe excess lubricant from hose and ferrule. Bring
hose with stem and ferrule back through die bed.
11b
11a
10b