Electronics International CGR-30P - Manual (Page 15)

6
installed and checked out, this password should be changed (whether a certified or non-certified CGR) to
a unique number and should be protected from unauthorized access.
If the new password is lost or a new shop requires access to calibration data (as allowed by the Mainte-
nance Password), Electronics International has a method of providing the Maintenance Password to any
FAA authorized shop or certified mechanic.
1.4.3 1.4.3 1.4.3 1.4.3 1.4.3 OEM/Experimental Password: OEM/Experimental Password: OEM/Experimental Password: OEM/Experimental Password: OEM/Experimental Password:
The OEM Password is for OEM's or Experimental installers. This password allows access to all System
Configuration Data. For a non-certified CGR, the OEM Password is “00100.” For a certified CGR this
password is only released under a contract or agreement.
This password protects the CGR from unauthorized access to calibration data. If calibration data is
improperly changed, it could lead to engine or aircraft damage and/or personal injury. Once the CGR is
installed and checked out, this password should be changed (whether a certified or non-certified CGR) to
a unique number and should be protected from unauthorized access.