Electronics International FP-5L - Manual (Page 14)

FP-5(L) / FFDM-1 Interconnect
Wiring Diagram
12
Circular Connec-
tor
6' Red Wire
6' Black Wire
6' White Wire
Red
Black
White
Fuel Flow Differential Module (FFDM-1).
Used with the FP-5(L) for carbureted
engines with a fuel return line.
Partial wiring
diagram for the
FP-5 or FP-5L.
Black
Red
Black
White
Red
Black
White
6' Red Wire
6' Black Wire
6' White Wire
6' Red Wire
6' Black Wire
6' White Wire
Red
Wire bundle marked
"Return"
Wire bundle marked
"Feed"
Circular Connector
3' Ground Lead, connects to same ground as FP-5(L).
3' Power Lead, connects to 12 or 24 Volt Bus Via 1 amp fuse.
Fuel Flow Transducer mounted in
the fuel line from the Fuel Pump
to the Carburetor.
Fuel Flow Transducer mounted in
the fuel return line from the
Carburetor to the fuel tank.
WARNING!
Electronics International Inc. only
authorizes the installation of the
FFDM-1 with the FP-5 or FP-5L.
Installing the FFDM-1 with any
other manufacturer's instrument may
seriously jeopardize the safety of the
aircraft.
Rev. I: 7/2/02