Fairbanks X SERIES PR 5410 Process Indicator - Manual (Page 90)

Section 4: Commissioning
10/08 90 51207 Revision 1
4.7.6 Printing Parameters
Setup
Serial ports parameter
Date & Time
Operating parameter
Printing parameter Press and
to select [Printing parameter]
Setup/Printing parameter
Print mode Print selected items Select [Print selected items]
1. Item Sequencenumber or [via NiceLabel]
2. Item Grossweight
3. Item CR/LF
4. Item -none-
5. Item -none-
6. Item -none-
When selecting item [via Nice Label] under [Print mode], printing with Nice Label Express (NLE) is
configured. The NLE program is available commercially.
When you select item [Print selected items] under [Print mode], you can compose a printout of 6
positions from the following list.
[Sequencenumber]
Current sequence number, max. 6 digits, after #999999 the #000001 is following.
[CR/LF], [Formfeed]
Carriage return and line feed, form feed.
[Deviceaddress]
Address of the instrument (A, B ... Z).
[-none-]
Nothing is printed. The function can be used for printing less than 6 data items.
[displayedweight], [Grossweight], [Netweight], [Tareweight]
The displayed gross, net or tare weight is printed. If [OIML], [NTEP] or [NSC] has been selected,
printing is done only, if the stability criteria is fulfilled, the weight is shown in '< >'. For [NTEP] or
[NSC] the grossweight is indicated with G (else B).
[Date & Time]
The date and time are printed as DD.MM.YYYY HH:MM:SS .
Example for printing:
1. Item Date & Time
2. Item Sequencenumber
3. Item Grossweight
4. Item Netweight
5. Item CR/LF
6. Item -none-