General Tools and Instruments DCS400-495 - Manual (Page 7)

Inserting the SD Card
After the SD card was inserted successfully
into SD card socket, “ ” icon will appear
on the screen; otherwise, “ ” icon will appear.
Connecting the USB Cable
Use the USB cable to connect the monitor to a
PC. The USB online icon appears on the PC.
Open My Computer, and find the Mobile Disk,
the video/picture files in SD card could be
copied/cut/played back.
NOTE! If the video files do not play on the PC normally, please
install the plug-in the enclosed CD-ROM.
Connecting Monitor Power
Connect the adapter to the monitor, the red power indicator will
light or the battery capacity icon on LCD of the monitor will flicker
which indicates charging, and will turn off after a full charge.
Video Output
Insert the video cable into the VIDEO OUT socket of monitor. Insert
the other end of the cable into the VIDEO IN jack of a TV or another
monitor. The LCD Monitor will output a high quality video.
7
Selecting the Recording Type
1. In the setting mode, press the or button to select
“RECORDER SETTING” then press the “OK” button to enter.
2. Press the or button to select “Recording Type” then press
the “OK” button to enter into the following interface:
3. Press the or button to select “STILL VIDEO” then press
the “OK” button to confirm and exit.
Setting the Date and Time
1. In the setting mode, press or button to select “Date/Time”
then press the “OK” button to enter into the Date/Time interface.
2. Press the “OK” button sequentially to select Date or Time; press
or button to modify; press button to confirm and exit.
Event Playback
1. In the setting mode, press the or button to select
“EVENT PLAYBACK” then press the “OK” button to enter.
2. Other operations see: “Play Video/Picture”,
“Delete Video/Picture”, and “Delete Folder” sections.
14