General Tools and Instruments GTi10-20-30-50 - Manual (Page 34)

34
Shooting
Using Analysis Tools
Setting Analysis Parameters
1
Make sure that the thermal camera is in null mode (see p.
14).
Press the MENU/ENTER button to open the Main Menu.
2 Use the UP or DOWN arrow to
navigate to the Analysis line. Then
press the MENU/ENTER button to
open the Analysis menu.
3
Use the UP or DOWN arrow to
navigate to the Analysis Setup line.
Then press the MENU/ENTER
button.
4
Setting analysis parameters.
a) Use the UP and DOWN arrows to
select an item to change, and the
LEFT and RIGHT arrows to set a
new value.
b) Repeat for each parameter you
wish to change.
c) Press the MENU/ENTER button to
save the setting(s), or the ESC
button to return to the Analysis
Setup menu without saving.