AT&T CL83301 - Manual (Page 84)

Answering system
78
Message playback
If you have new messages, you hear only the new messages in chronological
order. If there are no new messages, the system plays back all the messages
(in chronological order).
When playback begins, the total number of messages is announced. Before
each message, you hear the day and time of the recording. If the date and
time are not set, you hear, “Time and date not set,” before playback. After the
last message, you hear, “End of messages.” If the recording time is less than
3 minutes, you hear, “Less than three minutes to record” before playback
(see
Message capacity on page 76).
To listen to messages at the telephone base:
Press
/�LAY/
�TO�
on the telephone base to
listen to the messages.
If there are new and old messages, press q
CID
or p
DIR
to select >�lay new msgs or
>�lay old msgs, then press
MENU/
�ELECT or
/�LAY/�TO�.
If there are only new messages, they will play automatically.
-OR-
1. When the telephone base is in idle mode, press
MENU/
�ELECT
to enter the main menu.
2. Press
MENU
/�ELECT again to select >�lay messages.
If there are new and old messages, press q
CID
or
p
DIR
to select >�lay new msgs or >�lay old msgs,
then press
MENU/
�ELECT or /�LAY/�TO�.
If there are only new messages, they will play
automatically.
The system announces the number of messages, then
begins playback. The message sequence is shown on
the telephone base. If there are no recorded messages,
the telephone base shows
No message and you hear,
“You have no message.”
•
•
•
•
>Play messages
Answering sys
p
q
>Play new msgs
Play old msgs
p
q
3 New messages
10/15 10:01 NEW
Charlie Johnson
NEW MSG #1/3
10:01 AM 10/15 NEW