IDEC DATAVS1 Series - Manual (Page 38)

Instruction Manual SVS1 Series
33
• Clear: This deletes the inspection memorised on the selected bank.
Once the SET button has been pressed, the device requests delete confirmation. The user
can select the option using the ARROW buttons and then press SET to confirm.
It is possible to exit the bankset at any time by pressing the ESC button.
6.4. Fail Inspector
The fail inspector is a tool which permits the user to recall the images of the last inspection failures.
The sensor can log a maximum of 10 images: Where necessary, the 11th fail will overwrite the first
failure logged on a FIFO basis.
The list of the last 10 fails is displayed on the left side of the screen. Use the UP/DOWN ARROWS to
scroll the fail list. Some information data is displayed on the right for the selected fail. More precisely: