LockeyUSA 160-P User Manual
LockeyUSA Safety
Lockey P-Series
Installation Instructions for Keyless Panic Trims
310-P | 230-P | 285-P | 115-P | 160-P
Parts List
310-P 230-P 285-P 115-P 160-P
Outside Body
1
1
1
1
1
Rubber Escutcheon
1
1
1
1
1
Hex Bolts
2
2
2
4
4
Flat Spindle
1
1
N/A
N/A
1
Twisted Spindle (35
o
) (R/L)
2
2
N/A
2
N/A
Twisted Spindle (45
o
) (R/L)
N/A
N/A
2
N/A
N/A
30 mm. Screws
2
2
2
4
4
40 mm. Screws
2
2
2
4
4
Non-Combination Tumblers (Blue)
2
2
2
2
2
Combination Tumblers (Red)
2
2
2
2
2
Finish Washers
2
2
2
4
4
Tweezers
1
1
1
1
1
Lockey P-Series Keyless Locks are designed to replace the keyed cylinder on panic exits. P-Series locks
are compatible with MOST panic bars requiring a turn radius of 90
degrees or less. Modifications may be
required for the locks to operate with some panic bars.
1.) SET CODE/COMBINATION (310-P, 285-P, 115-P, 160-P)
Before installing the lock on the door, set the combination to your desired code. Use the How to
Change Code instructions (included) to change the code.
IMPORTANT FOR CHANGING CODE
When removing and inserting Tumblers, ALWAYS PRESS AND HOLD the “C” Button (clear).
2.) INSTALLATION
1.) After the panic bar is installed on the door, determine the center of the tailpiece hole on the
outside of the door.
2.) Place the template (included) over the center hole. Mark the top and bottom mounting holes to
mount the lock body on the door.
3.) Drill mounting holes.
a. NEW INSTALLATION – Drill 3/8” mounting holes at the top and bottom, and a ½”
(minimum) hole to accommodate the tailpiece.
b. RETRO-FITTING – If the existing hole is 2” or less, proceed with Step 4. If the existing
hole is larger than 2” you may need to purchase a Lockey T-Metal or T-Cover plate to
accommodate the lock.
4.) Place the rubber escutcheon on the back of the lock body and mount the lock on the door using
the supplied Finish Washers and Screws.
5.) After the lock is mounted on the door, place the proper spindle into the center (spindle) hole.
You may need to use the right or left twist depending on the knob/lever turn direction.