Teledyne LeCroy WaveRunner МXi-A Getting Started Manual - Manual (Page 16)

WaveRunner Xi-A and MXi-A Oscilloscopes
8 922138-00 Rev A
If you minimize the application, touch the desktop icon to maximize it:
Restarting the Operating System
If you need to restart the Windows® operating system, you must reboot the
oscilloscope by pressing the power switch, and then turning the power back
on after a ten-second wait.
External Monitor
Your WaveRunner Xi Series oscilloscope’s motherboard contains a dual-video
chip. This enables extension of the desktop over two monitors or to display a
clone of the oscilloscope screen on an external monitor.
For example, in extended mode, the scope can be showing the UI on the
internal monitor and another application like Excel® on the external monitor,
or vice versa. Or, turn the scope monitor off and view the scope UI only from
the external monitor if desired.
Hardware Connections
Numbers on the previous picture correspond as follows:
1. Mouse 3. RS-232-C Port 6. Ethernet Port 8. Speakers
2. Keyboard
4. Teledyne LeCroy
Bus (LBus)
7. USB Ports (4) 9. Line In
5. External VGA
Monitor