Teledyne LeCroy WaveSurfer Automation Command - Manual (Page 208)

Automation Command and Query Reference Manual - Control Reference
ResetZoom Action
Resets the zoom settings to their default values.
Description
VariableHorZoom Bool
Enable/Disable the variable Horizontal Zoom control. If enabled, the HorZoom control may be set to a
value other than the standard 1, 2, 5 sequence.
Description
VariableVerZoom Bool
Enable/Disable the variable Vertical Zoom control. If enabled, the VerZoom control may be set to a
value other than the standard 1, 2, 5 sequence.
Description
VerPos Double
From -1.5 to 1.5 step (8 digits) Range
Vertical Position of the trace, normalized to a value between -1.5 and 1.5. A value of zero is the
default, and indicates no position change relative to the source trace.
Description
VerZoom Double
From 0.1 to 100 step (8 digits) Range
Vertical Zoom setting. Locked to a 1, 2, 5 sequence unless VariableVerZoom is set to True .
Description
1-201
918499 RevA