Teledyne LeCroy WaveSurfer Automation Command - Manual (Page 40)

Automation Command and Query Reference Manual - Control Reference
CSSource Enum
Defines channel with the chip select signal (if applies to protocol) to trigger on serial data
Description
Values
C1
C2
C3
C4
Ext
ExtDivide10
DataSource Enum
Defines channel with the Data signal (mandatory) to trigger on serial data
Description
Values
C1
C2
C3
C4
Ext
ExtDivide10
LevelAbsolute Double
From 0 to 5 step 0.1 Range
Defines the threshold level applied to Serial data inputs (Data, Clock, CS)
Description
LevelHighAbsolute Double
From 0 to 5 step 0.1 Range
Defines the upper threshold level applied to tri-modal Serial Data protocol inputs (FlexRay)
Description
1-33
918499 RevA