Teledyne LeCroy SierraFC M164 User Manual - Manual (Page 190)

Teledyne LeCroy Switching Views
190 SierraFC M164 Protocol Analyzer User Manual
Frame Inspector View
Frame Inspector View has lots of information that is available in Packet View, but not Spread‐
sheet View, so it is most useful in conjunction with the Spreadsheet View.
This view has the following three tabs:
Spec View:
This view shows the Frame as it would appear in the spec, with the field names and
values spelled out clearly. Fields that are too short to clearly contain the description can
be viewed as tooltips by hovering the mouse over them. Some fields might have a a
lowercase ‘e’ button at the top right corner. Pressing this button displays an ‘expanded’
view of the sub‐fields in this field.
Field View:
This view shows, when applicable, a hierarchical display of the selected Packet, with the
relevant fields in each level.
Raw Data View:
This view shows Hex, 10‐bit and Running Disparity views of each dword in the selected
packet.
To open a Frame Inspector View of the current capture, select View > Frame Inspector
View or click the button on the View Type toolbar.
Figure 3.12: Frame Inspector View