IEI Integration KINO-945GSE2 - Manual (Page 112)

KINO-945GSE2 Motherboard
Page 100
Sredir Memory Display Delay [Disabled]
Use the Sredir Memory Display Delay option to select the delay before memory
information is displayed. Configuration options are listed below
No Delay D EFAULT
Delay 1 sec
Delay 2 sec
Delay 4 sec
5.3.7 USB Configuration
Use the USB Configuration menu to read USB configuration information and configure
the USB settings.
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Power Exit
USB Configuration
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
Module Version – 2.24.0-11.4
USB Devices Enabled:
None
USB Function
[Enabled]
Legacy USB Support [Enabled]
USB 2.0 Controller [Enabled]
USB 2.0 Controller Mode [HiSpeed]
Enables USB host
controllers
Select Screen
↑ ↓ Select
Item
Enter Go to SubScreen
F1 General
Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 12: USB Configuration
Onboard SiS USB1.1 DEVICE [Enabled]
Use the Onboard SiS USB1.1 DEVICE BIOS option to enable or disable the onboard SiS
USB1.1 controller. If disabled, USB1.1 devices cannot be used.
Disabled USB 1.1 interface is disabled and cannot be used.
Enabled D EFAULT USB 1.1 interface is enabled and can be used.