IEI Integration KINO-PV-D4252_D5252 - Manual (Page 60)

KINO-PV-D5252/D4252 Mini ITX SBC
Page 46
4.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the
KINO-PV-D5252/D4252 may result in permanent damage to the
KINO-PV-D5252/D4252 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the KINO-PV-D5252/D4252. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the KINO-PV-D5252/D4252 or any other electrical
component is handled, the following anti-static precautions are strictly adhered to.
 Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
 Self-grounding: Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
 Use an anti-static pad: When configuring the KINO-PV-D5252/D4252, place
it on an antic-static pad. This reduces the possibility of ESD damaging the
KINO-PV-D5252/D4252.
 Only handle the edges of the PCB: When handling the PCB, hold the PCB
by the edges.