2 clear cmos jumper, Figure 4-9: at/atx mode select jumper location, Table 4-2: at/atx mode select jumper settings – IEI Integration KINO-DH610 User Manual

Page 61: Table 4-2, Figure 4-9, N in table 4-2

Advertising
background image

KINO-DH610

Page 49

Setting Description

Open

ATX Mode

Short

AT Mode

Default

Table 4-2: AT/ATX Mode Select Jumper Settings

The location of the AT/ATX mode select jumper is shown in Figure 4-9 below.

Figure 4-9: AT/ATX Mode Select Jumper Location

4.4.2 Clear CMOS Jumper

Jumper Label:

J_CMOS1

Jumper Type:

3-pin header

Jumper Settings:

See Table 4-3

Jumper Location:

See Figure 4-10

If the KINO-DH610 fails to boot due to improper BIOS settings, the clear CMOS jumper

clears the CMOS data and resets the system BIOS information. To do this, use the jumper

cap to close pins 2 and 3 for a few seconds then reinstall the jumper clip back to pins 1

and 2.

Advertising
See also other documents in the category IEI Integration Hardware: