IEI Integration KINO-DH610 - Manual (Page 81)

KINO-DH610
Page 69
5.3.4 SATA Configuration
Use the SATA Configuration menu (BIOS Menu 7) to change and/or set the
configuration of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Advanced
SATA Configuration
SATA Mode
[IDE Mode]
Serial-ATA Controller 0 [Compatible]
Serial-ATA Controller 1 [Enhanced]
SATA Port0 Not Present
SATA Port1
Not Present
SATA Port2
Not Present
SATA Port3
Not Present
(1) IDE Mode. (2) AHCI
Mode. (3) RAID Mode.
---------------------
: Select Screen
 : Select Item
Enter
Select
+/-: Change Opt.
F1 General
Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 7: IDE Configuration
 SATA Mode [IDE Mode]
Use the SATA Mode option to configure SATA devices as normal IDE devices.

Disable Disables SATA devices.

IDE Mode D EFAULT Configures SATA devices as normal IDE device.

RAID Mode Configures SATA devices as RAID device.
 Serial-ATA Controller 0 [Compatible]
Use the Serial-ATA Controller 0 option to configure the Serial-ATA controller mode when
the SATA mode is set to IDE Mode.

Disable Disables Serial-ATA controller.