IEI Integration IMBA-C2060 v2.01 - Manual (Page 77)

IMBA-C2060 ATX Motherboard
Page 61
Figure 4-10: Wake-on LAN Connector Pinout Locations
4.4 Internal Peripheral Device Connections
This section outlines the installation of peripheral devices to the onboard connectors.
4.4.1 SATA Drive Connection
The IMBA-C2060 is shipped with four SATA drive cables. To connect the SATA drives to
the connectors, please follow the steps below.
Step 1: Locate the connectors. The locations of the SATA drive connectors are shown
in Chapter 3.
Step 2: Insert the cable connector. Insert the cable connector into the on-board SATA
drive connector. See Figure 4-11.