IEI Integration IMBA-C2060 v2.01 - Manual (Page 85)

IMBA-C2060 ATX Motherboard
Page 69
Figure 4-19: USB Connector
4.5.8 VGA Monitor Connection
The IMBA-C2060 has a single female D-sub 15 connector on the external peripheral
interface panel. The D-sub 15 connector is connected to a CRT or VGA monitor. To
connect a monitor to the IMBA-C2060, please follow the instructions below.
Step 1: Locate the female D-sub 15 connector. The location of the female D-sub 15
connector is shown in Chapter 3.
Step 2: Align the VGA connector. Align the male D-sub 15 connector on the VGA
screen cable with the female D-sub 15 connector on the external peripheral
interface.
Step 3: Insert the VGA connector . Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
IMBA-C2060. See Figure 4-20.