3 installation and configuration steps, 4 removing the hdd cover, Nstallation and – IEI Integration AFL-15i-HM55 v2.00 User Manual
Page 31: Onfiguration, Teps, Emoving the, Over
Advertising

AFL-HM55 Series Panel PC
Page 20
3.3 Installation and Configuration Steps
The following installation steps must be followed.
Step 1:
Remove the HDD cover
Step 2:
Install a SATA DOM card
Step 3:
Install an HDD
Step 4:
Remove the rear panel cover
Step 5:
Remove the internal aluminum cover
Step 6:
Configure the system jumpers
Step 7:
Connect peripheral devices to the bottom panel of the flat panel PC
Step 8:
Mount the flat panel PC
3.4 Removing the HDD Cover
Step 1:
Remove one (1) retention screw on the cover. See Figure 3-1.
Advertising
This manual is related to the following products: