2 atx power mode, 9 jumper settings – IEI Integration AFL-xxA-N270-Series v2.30 User Manual
Page 49
AFL-xxA-N270 Series Panel PC
Page 33
ATM
Self-service
kiosk
Plant environment monitoring system
Factory automation platform
Manufacturing shop flow
4.8.2 ATX Power Mode
With the ATX mode selected, the AFL-xxA-N270 panel PC goes in a standby mode when
it is turned off. The panel PC can be easily turned on via network or a power switch in
standby mode. Remote power control is perfect for advertising applications since the
broadcasting time for each panel PC can be set individually and controlled remotely. Other
possible application includes
Security
surveillance
Point-of-Sale
(POS)
Advertising
terminal
4.9 Jumper Settings
NOTE:
A jumper is a metal bridge used to close an
electrical circuit. It consists of two or three metal
pins and a small metal clip (often protected by a
plastic cover) that slides over the pins to connect
them. To CLOSE/SHORT a jumper means
connecting the pins of the jumper with the plastic
clip and to OPEN a jumper means removing the
plastic clip from a jumper.
The following jumpers can be found on the motherboard installed in the AFL-xxA-N270.
Before the AFL-xxA-N270 is installed, the jumpers must be set in accordance with the
desired configuration. The jumpers on the AFL-xxA-N270 motherboard are listed in Table
4-1
.
- UPC-V312-D525 v1.02
- UPC-V312-D525 v1.10
- UPC-12A_GM45 v1.00
- UPC-12A_GM45 v2.00
- UPC-12A_GM45 v2.10
- UPC-V315-NM70
- UPC-V315-Screw Driver
- UPC-V315-QM77
- S12ASR v1.12
- S12ASR v3.00
- PPC-5xxx-9455 v1.00
- PPC-5xxx-9455 v1.10
- PPC-WIDS-51xxA-G41
- PPC-51xxA-H61
- PPC-5152-D525 v1.02
- PPC-5152-D525 v2.10
- PPC-37xxA-N26 v1.00
- PPC-37xxA-N26 v1.10
- PPC-37xx-N270 v1.01
- PPC-37xx-N270 v2.00
- PPC-37xx-N270 v2.11
- PPC-37xx-N270 v2.20
- ACT-457A
- AFL-4 series-N270 v1.05
- AFL-4 series-N270 v2.10
- AFL-4 series-N270 v2.11
- AFL-4 series-N270 v2.20
- AFL-W19A_W19B_17D_W15A-GM45 v2.10
- AFL-W19A_W19B_17D_W15A-GM45 v1.06
- AFL-W19A_W19B_17D_W15A-GM45 v2.20
- AFL-W15A_17D-GM45 v3.00
- AFL-15i-HM55 v1.01
- AFL-19i-HM55 v2.00
- AFL-15i-HM55 v1.20
- AFL-W19A_W19B_17D_W15A-N270 v1.06
- AFL-W19A_W19B_17D_W15A-N270 v2.20
- AFL-W19A_17D_W15A-N270 v3.00
- AFL-15A_15AE-N270_UMN_v1.01.pdf
- AFL-15A-N270 v1.03
- AFL-15A-N270 v2.10
- AFL-15A-N270 v2.20
- AFL-xxA-N26
- AFL-xxA-N270-Series v1.03
- AFL-xxA-N270-Series v2.00
- AFL-xxA-N270-Series v2.11
- AFL-xxA-N270-Series v2.20
- AFL-W10A-N270 v1.00
- AFL-W10A-N270 v2.13
- AFL-W10A-N270 v3.10
- AFL-W10A-N270 v3.20
- AFL-08AH-N270
- AFL-07A 08AH 10A 12A-LX Series
- AFL-LX-Series v2.01
- AFL-LX-Series v2.10
- AFL-F08A v2.10
- AFL-F08A v1.01
- AFL-F08A v2.21
- AFL-F08A v2.40
- AFL-08B-N270 v1.00
- AFL-08B-N270 v2.10
- AFL-08B-N270 v2.20
- AFL-08B-N270 v2.30
- AFL-057A-LX v1.02
- AFL-057A-LX v2.10
- AFL2-W21-H61
- AFL2-W19A-H61 v1.11
- AFL2-W19A-H61 v1.21
- AFL2-17A-H61 v1.02
- AFL2-17A-H61 v1.11
- AFL2-17A-H61 v1.23
- AFL2-W15B-H61
- AFL2-15A-H61
- AFL2-12A-HM65 v1.00
- AFL2-12A-HM65 v1.12
- AFL2-12A-D525
- AFL2-W15A-N270 v2.00
- AFL2-W15A-N270_W15A-L325 v1.01
- AFL2-W10A-N28
- AFL2-10A-N28
- AFL2-08A-N26
- AFL2-W07A-N26
- POC-17i_19i-Series_IEI
- IBS-19A
- Robot-TP-65M
- RPC-6022G
- RPC-6106_6108
- RPC-6010G
- EC-1040G
- LKM_Series
- IOVU-572M
- IOVU-752S
- IOVU-751R