IEI Integration AFL-xxA-N270-Series v2.30 - Manual (Page 86)

AFL-xxA-N270 Series Panel PC
Page 70
Î
Enhanced
Configures the on-board ATA/IDE controller to be in
Enhanced mode. In this mode, IDE channels and SATA
channels are separated. This mode supports up to 6
storage devices. Some legacy OS do not support this
mode.
Î Legacy IDE Channels [SATA Pri, PATA Sec]
Î
SATA Only
Only the SATA drives are enabled.
Î
SATA Pri, PATA Sec D EFAULT
The SATA drives are enabled on the primary
IDE channel, traditional IDE devices are
enabled on the secondary channel
Î
PATA Only
Only the IDE devices are enabled
Î IDE Master and IDE Slave
When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the
status of the auto detected IDE devices. The following IDE devices are detected and are
shown in the IDE Configuration menu:
ƒ Primary IDE Master
ƒ Primary IDE Slave
ƒ Secondary IDE Master
ƒ Secondary IDE Slave
The IDE Configuration menu allows changes to the configurations for the IDE devices
installed in the system. If an IDE device is detected, and one of the above listed four BIOS
configuration options are selected, the IDE configuration options are shown.
6.3.2.1 IDE Master, IDE Slave
Use the IDE Master and IDE Slave configuration menu to view both primary and
secondary IDE device details and configure the IDE devices connected to the system.
Almost all settings are set to auto-detect, which will work for all modern drives.