IEI Integration EC-1040G - Manual (Page 51)

EC-1040GB Workstation
Page 41
Step 4: Insert four retention screws, two each on the left and right side panels, to secure
the keyboard to the workstation (Figure 4-15). Step 0:
Figure 4-15: Keyboard Retention Screws
4.6 Mounting the EC-1040GB Rackmount Workstation
The EC-1040GB workstation can be mounted to the posts of a standard 19” rack cabinet.
Adequate rails, rack tray, or side brackets should also be available for supporting the
weight of the workstation. Make sure that all cabling is correctly attached and carefully
routed when installing the workstation.
NOTE:
At least two people are required to mount the workstation. The rack or cabinet
into which the workstation is installed should provide adequate and sufficient
ventilation, grounding, power source, and stability features.
NOTE:
This section gives a generic description of the rack mounting process for the
EC-1040GB rackmount workstation. Alternate rack mounting systems may
require different mounting procedures. Be sure to follow the manufacturer’s
instructions when mounting the workstation.