Progressive International Electronics PIcon II Console User Manual
Page 43
PIcon II
Diagnostics
Rev 1.0
January 2014
38
•
Locate top diagnostic window displayed on terminal
•
Select D, Section Diagnostics
•
Select P, Printer Diagnostics
•
Select D, Download the Print Header.
•
At the prompt, download may be aborted by pressing Escape key or continued by
entering any other key.
•
If continuing download, C’s will continue to appear onscreen until the file to be
downloaded is selected. To select the print header file, go to Hyperterm’s toolbar and
select Transfer, then Send File. At the dialog box, browse for file to be downloaded.
Select the file you have previously written for the print header. Under the Protocol
section of the dialog box, select Xmodem. Press Send button. File will be downloaded.
When download is complete, program will automatically return to the previous prompt.
Configure Pump
Dispenser specific options must be selected for some dispenser brands. Follow the sequence
below to configure these brands. If C, Configure Pump, does not appear after selecting
Dispenser, this particular dispenser does not require configuration.
•
Locate top diagnostic window displayed on terminal
•
Select D, Section Diagnostics
•
Select D, Pump Diagnostics
•
Select P, Pump Diagnostics — If C, Configure Pump, does not appear at this point, this
particular dispenser does not allow configuration.
•
Select C, Configure Pump
•
Select from options in menu window