Function, Command/response (for normal operation) – Yokogawa JUXTA M Series Digital Limit Alarms MVTK User Manual
Page 33
<Toc> <Ind>
<3. PC Link Communication >
3-19
IM 77J04J11-01E 1st Edition : 2006.08.25-00
INF Reads the model, range code number, number of alarms and revision
●
Function
Returns the model, range code number, number of alarms and revision of the M Series.
•
For the format of response in the event of failure, see subsection 3.1.2.
●
Command/Response (for normal operation)
Number of Bytes
1
2
2
1
3
1
2
1
1
4
4
2
1
1
Command
element
STX
Address
number
(ADR)
CPU
number
01
Checksum
Response
time (0)
INF
6
ETX
CR
Number of Bytes
1
2
2
2
8
8
4
4
Response
element
STX
Start register
specified for
readout
refreshing *
Address
number
(ADR)
CPU
number
01
OK
ᮀᮀᮀᮀᮀᮀᮀᮀ
(Note 1)
Version
Revision
(Note 2)
Number of
registers
specified for
readout
refreshing *
ETX
CR
Start register
specified for
write
refreshing *
Number of
registers
specified for
write
refreshing *
Checksum
Response (continued)
The * mark indicates fields the FA-M3 UT link module refers to.
Note 1:
Model and input/output information of the M Series
Model information
MVHK: Digital limit alarm (DC input type)
MVRK: Digital limit alarm (RTD input type)
MVTK: Digital limit alarm (Thermocouple input type)
Number of alarms
2: 2 points of alarm outputs
4: 4 points of alarm outputs
Range code number
Value set in the parameter IN
Space
Note 2:
Version number and revision number
Revision number of downloaded data
ROM version number
.