Sterling VS - Manual (Page 28)

Customer ____________________________________ Job Name & Number _________________________
PRE-INSPECTION INFORMATION
With power and water/steam off.
Type of Equipment: Unit Heater
Serial Number _________________________ Model Number __________________________
Name Plate Voltage: _____________ Name Plate Amperage: _____________
Steam Hot Water Rating: _ _____ BTU @ ____ °F
_ _____ kw @ ____ °C
❒
Are all panels in place?
❒
Has the unit suffered any external damage? Damage ______________________________
❒
Does the piping and electric wiring appear to be installed in a professional manner?
❒
Has the piping and electric been inspected by the local authority having jurisdiction?
❒
Is the supply properly sized for the equipment?
❒
Were the installation instructions followed when the equipment was installed?
❒
Have all fi eld installed controls been installed?
❐
Do you understand all the controls on this equipment? If not, contact your wholesaler or rep.
(DO NOT START this equipment unless you fully understand the operation of this equipment.)
EQUIPMENT
START-UP
FAN
With power on
❐
Check voltage L1 _____ L2 _____ L3 _____
❐
Check fan rotation.
❐
Check motor amps L1 _____ L2 _____ L3 _____