Lincoln Electric IM827 POWER FEED 10M WIRE FEEDER - Manual (Page 24)

b-1 OPERATION b-1
POWER FEED ® 10M SINGLE WIRE FEEDER
WIRE FEEDER
POSITIVE OUTPUT
NEGATIVE OUTPUT
PROTECTIVE
GROUND
WARNING OR
CAUTION
SAFETY PRECAUTIONS
Read this entire section of operating instructions
before operating the machine.
ELECTRIC SHOCK can kill.
• Do not touch electrically live parts
or electrodes with your skin or wet
clothing.
• Insulate yourself from the work and
ground.
• Always wear dry insulating gloves.
• Do not use AC welder if your cloth-
ing, gloves or work area is damp or
if working on, under or inside work-
piece.
Use the following equipment:
-DC manual (stick) welder.
-AC welder with reduced voltage
control.
• Do not operate with panels removed.
• Disconnect input power before servicing.
-------------------------------------------------------------
READ THIS WARNING, PROTECT
YOURSELF & OTHERS.
FUMES AND GASES can be
dangerous.
• Keep your head out of fumes.
• Use ventilation or exhaust at the arc, or both,to
keep fumes and gases from your breathing
zone and general area.
WELDING SPARKS can cause fire
or explosion.
• Do not weld near flammable material.
• Do not weld on containers which
have held flammable material.
ARC RAYS can burn.
• Wear eye, ear, and body protection.
ONLY QUALIFIED PERSONS SHOULD INSTALL,
USE OR SERvICE THIS EQUIPmENT. READ AND
FOLLOW THE mANUFACTURER’S INSTRUC-
GRAPHIC SYMbOLS THAT APPEAR ON
THIS MACHINE OR IN THIS MANUAL