LumaSense Technologies InfraWin 5 User Manual
LumaSense Technologies Software
Advertising
Table of contents
Document Outline
- 1 General
- 2 Getting Started
- 3 Working with the Devices/ Parameters Window
- 3.1 Selecting Devices
- 3.2 Working with Pyrometer Parameter Settings
- 3.2.1 Material
- 3.2.2 Emissivity
- 3.2.3 Transmittance
- 3.2.4 E-Ratio K
- 3.2.5 EmiAutoFind
- 3.2.6 Operating Modes
- 3.2.7 “Dirty Window” Warning (2-color pyrometers only)
- 3.2.8 Minimum Intensity Switch-Off Level (2-color pyrometers only)
- 3.2.9 Response Time t90
- 3.2.10 Clear time of the maximum / minimum value storage (tCL)
- 3.2.11 Temperature display in °C or °F
- 3.2.12 Address
- 3.2.13 Baud Rate
- 3.2.14 Analog Output
- 3.2.15 Current Input (only for series 6000 display and controller units)
- 3.2.16 Ambient Temperature Compensation
- 3.2.17 Basic Range
- 3.2.18 Sub Range
- 3.2.19 Laser
- 3.2.20 1-Channel Temp / Ratio Temp
- 3.2.21 LED targeting light
- 3.2.22 Limit switch (SP1)
- 3.3 Additional Settings
- 4 Measurement
- 5 I/O Module
- 6 Controller
- 7 Data format UPP® (Universal Pyrometer Protocol)
- Index