LumaSense Technologies InfraWin 5 - Manual (Page 21)

InfraWin 5 Manual Measurement 21
4 Measurement
To learn more about obtaining and saving measurement values, view Sections 2.3 and 2.4.
4.1 Measurement Input/Output Screen
The measurement
function allows you to
access a number of
“input” tabs located on the left side of
the screen. The main or home tab is the
Output Screen. You can toggle the input
tabs on and off by clicking them.
This window displays:
temperature as graphical diagram
internal temperature of the
instrument
current temperature
quantity of the measured values and
file size of the current measurement
Note: The measuring values of the measurement color bar or measurement online
trend are automatically saved as standard.i12. Should you need to edit the
data later, you need to save the file as another .i12-file because old values are
overwritten when a new measurement is taken.
InfraWin5 uses .i12-files. To view a .i10-file in InfraWin5, you must open the
.i10-file using InfraWin4 and save it as an *.i12-file.
4.1.1 Parameters Tab
The pre-selected devices are listed in the
Devices/Parameters section of the Parameters Tab.
Select the desired device from the list to show or hide
its outputs.
When you click Load parameters for a selected device,
the pyrometer parameters will be loaded and shown.
These values can then be changed through the
software. However, note changes will cause the
measurement to pause for milliseconds.
4.1.2 Scaling Tab
The Scaling feature allows you to determine how to
handle the graphical presentation of temperature
values.
You can set the scaling function manually by clicking
on the device. You can also choose to set the function