American Dryer Corp. M75SL User Manual

Page 5

Advertising

113431 - 10

www.amdry.com

The “Cool Down” Cycle of tumble dryers should be used to
reduce the temperature of the items. They should not be
removed from the tumble dryer or piled or stacked while hot.
Fabric softeners or similar products should not be used in a
tumble dryer to eliminate the effects of static electricity, unless
this practice is specifically recommended by the manufacturer
of the fabric softener or product.

Warning

To reduce the risk of personal injury, install
lockable doors to prevent public access to the rear

of the dryers.

Exhaust duct outlet should be checked periodically for
blockages, and if any found, removed.

Important

A means of restraint must be used to prevent
straining of the gas supply when the appliance is

moved.
An external means of power removal (disconnect device)
must be provided by the installer.

CE ONLY

Important

This appliance must only be installed and
operated in the country of destination indicated on

the dryer’s data plate. If the appliance is to be installed and
operated in a country other than the one indicated on the
data plate, a data plate amendment must be obtained from
American Dryer Corporation.

Warning

This appliance must only operate with the gas type
indicated on the dryer’s data plate. If the

appliance is converted (gas type is changed), a data plate
amendment must be obtained from American Dryer
Corporation.
This appliance may cause spillage of products of
combustion from an open-flue appliance fitted in the same
room, and that such an appliance shall be tested for
clearance of products with the appliance in operation and
all windows and doors closed.

NOTES ______________________________________________________

_____________________________________________________________

NOTES ______________________________________________________

_____________________________________________________________

Advertising

This manual is related to the following products:

M31SL