HT instruments MACROTEST 5035 - Manual (Page 8)

MACROTEST 5035
EN - 7
3. PREPARATION FOR USE
3.1. INITIAL CHECK
This instrument has been checked mechanically and electrically prior to shipment.
Any care has been taken to ensure that the instrument reaches you under safe conditions.
You are recommended, however, to carry our a rapid check to detect any possible
damage which might have been caused during transport. Should this be the case,
immediately contact HT Italia.
Check also that the packaging contains all the parts listed under paragraph 9.3. In case of
discrepancies contact the dealer.
In case you have to send the instrument back please follow the instructions reported in
paragraph 10.
3.2. POWER
SUPPLY
The instrument is supplied by six batteries model 1.5V – LR6 – AA – AM3 – MN 1500 not
included in the package.
To replace batteries follow the instructions reported in paragraph 8.2.
When batteries are low the symbol
is displayed. To replace batteries follow the
instructions indicated in paragraph 8.2
3.3. CALIBRATION
The instrument fulfils the technical specifications listed in this manual. The performance of
the specifications are guaranteed for one year.
3.4. STORAGE
In order to grant the accuracy of the measurements, after a period of storage in extreme
environmental conditions, wait for the time necessary so that the apparatus is back to
normal measuring conditions (see environmental specifications listed in paragraph 9.2.1).