HT instruments MACROTEST 5035 - Manual (Page 9)

MACROTEST 5035
EN - 8
3.5. HOW TO SET MEASUREMENT UNIT
Is possible to set the distance measurement unit (in earth resistivity) following this
procedure:
1. While pushing FUNC button turn the switch on any position.
2.
The instrument will display the following
screen. le
m
3. Choose the desired distance measurement unit between meter and feet that change by
pushing
S▲ and U
L
▼ keys (appear m and ft).
4.
Push SAVE key confirming the choice.
The instrument will display the following
screen. le
m
OK
Push ESC key leaving this menu without
confirming any change.