KROHNE UFM 530 HT EN - Manual (Page 61)

TECHNICAL DATA
8
61
UFM 530 HT
www.krohne.com 12/2013 - 4002393201- HB UFM 530 HT R02 en
8.2 Technical data
INFORMATION!
• The following data is provided for general applications. If you require data that is more
relevant to your specific application, please contact us or your local sales office.
• Additional information (certificates, special tools, software,...) and complete product
documentation can be downloaded free of charge from the website (Download Center).
Measuring system
Measuring principle Ultrasonic transit time.
Application range (Non) conductive fluids.
Measured value Measured value Measured value Measured value
Primary measured value Transit time.
Secondary measured value Volume flow rate, totalised volume, velocity of sound (VoS), signal
strength, flow direction.
Design
The measurement system consists of a measuring sensor and a
signal converter. It is only available as separate version.
Measuring range 0.5...20 m/s / 1.7...66 ft/s
Signal converter Signal converter Signal converter Signal converter
Wall-mounted housing (W) -
remote version
UFC 030 F
Measuring sensor Measuring sensor Measuring sensor Measuring sensor
UFS 500 HT is available in the following pipe diameters and building constructions:
DN25...80 / 0.98...3/15" Single beam construction.
DN100...300 / 3.94...11.81" Dual beam construction.
Larger diameters on request.
Options Options Options Options
Inputs / outputs Current (incl. HART ® ), pulse, frequency and/or status output, limit
switch and/or control input (depending on the I/O version)
Counters 2 internal counters with a max. of 8 counter places (e.g. for counting
volume and/or mass units)
Display and user interface Display and user interface Display and user interface Display and user interface
Graphic display 3-Line local display with backlight
Display turnable in 90° steps
The readability of the display could be reduced at ambient
temperatures below -25°C / -13°F
Operator input elements 3 keys for operator control of the signal converter
Magnetic pin for operator control of the signal converter (optional)
Remote control All DTM's and drivers are available at the internet homepage of the
manufacturer
PACTware ® including Device Type Manager (DTM)