KROHNE PipePatro EN - Manual (Page 17)

OPERATION
3
17
PIPEPATROL
www.krohne.com 02/2013 - 4002275001 - MA PipePatrol R01 en
3.3.2 Controls
The control buttons, at the bottom of the screen, enable to switch between different screens. The
offered buttons and their functionality depend on the actual showed screen. The meaning of
them will be explained in detail in the next chapters. The following buttons are available on each
screen:
3.3.3 Operator windows
The operator window is the essential part of the PipePatrol HMI. With this screen the operator
can look on the details of each running leak detection system, monitor the behaviour and control
the system. The actual showed information depends on the selected screen.
Description of the offered screen architecture of the HMI
Figure 3-2: Control buttons
1 Button to switch to last showed screen
2 Events
3 Alarm History
4 Explanation
1 Last showed screen:
Switch back to the last showed screen.
(After a start-up of the HMI this button has no functionality)
2 Shows the event list (for details refer to Events on page 26).
3 Shows the alarm history (for details refer to Alarm history on page 29).
4 Shows the legend screen (for details refer to Explanation (Legend) on page 30).
Main Overview
Leak Information
Trends
Pipeline Overview
Trends
Login/Logoff
User Settings
Exit
Events
Alarm History
Explanation