KROHNE PipePatro EN - Manual (Page 20)

3
OPERATION
20
PIPEPATROL
www.krohne.com 02/2013 - 4002275001 - MA PipePatrol R01 en
3.3.5 Pipeline Overview
By selecting one of the pipelines showed on the "Main Overview", a detailed overview of this
particular pipeline will be displayed. In this paragraph the pipeline details for pipeline 1 are
described, details are however exactly similar for all pipelines.
The following data is shown:
• Actual volume/mass flow at inlet and outlet
• Actual pressure at inlet and outlet
• Actual product temperature at inlet and outlet
• Actual ground temperature at inlet and outlet (optional)
• Actual density at inlet and outlet (optional)
• Actual standardised flow at inlet and outlet (optional)
• Velocity of sound at inlet and outlet (optional)
• Actual measurement data of additional sensors (e.g. intermediate stations, optional)
• Actual state of measurement
- (grey): unknown
- (green): OK
- (red): faulty
• Valves position at inlet and outlet (optional)
- (grey): unknown
- (black): closed
- (yellow): open
- (yellow/grey): moving
- (red): faulty
Figure 3-4: Example of pipeline details