KROHNE OPTISENS PAM 2080 EN - Manual (Page 53)

www.krohne.com 53
6.9 Data logger settings
If one or more data logger windows were activated in the general cross-channel settings,
you have the opportunity to configure the hydrograph screens.
You can depict up to 3 measuring channels simultaneously per screen.
Use Enter to call up the respective hydrograph screen.
Use Menu to call up the data logger settings:
Designation Settings Description
Hydrograph
Range 000.1 – 999.9 h Establishes the range to be depicted
Scale 000.1 – 999.9 h Establishes the scale with time and date display
1st curve
Address 01 – 08 Selection of the channel that is to be displayed in this screen.
Title Indicate a title for the channel here
Start 000.0 ppm Measuring range start that is to be depicted
Finish 000.0 ppm Measuring range finish that is to be depicted
2nd curve
Address 01 – 08 Selection of the channel that is to be displayed in this screen.
Title Indicate a title for the channel here
Start 000.0 ppm Measuring range start that is to be depicted
Finish 000.0 ppm Measuring range finish that is to be depicted
3rd curve
Address 01 – 08 Selection of the channel which is to be displayed in this screen.
Title Indicate a title for the channel here
Start 000.0 ppm Measuring range start that is to be depicted
Finish 000.0 ppm Measuring range finish that is to be depicted