MAGURA RADIAL 195 - Manual (Page 33)

33
uK
ProbleM
Brakes squeal during braking
Brake pads oily (brake fluid, oil)
Front wheel not turning
freely
Brake disc oily
Running wheel cannot be
mounted
Brakes are very noisy and
braking is very rough
caUse
Poor mounting conditions
Spokes on the wheel have
insufficient tension.
Brake disc worn
Carbon pad and sinter pad
being used on one brake
disc
Carelessness
Mounting incorrect. Too
much brake fluid in the
compensating reservoir. Brake
caliper not aligned
with brake disc.
Carelessness
The brake lever has been
pulled in with the running
wheel removed
Pads completely worn out,
the lining carrier material
have worn the disc
rectification
Reposition brake caliper
correctly. Ensure
that the mounting holes
are free from damage and dirt.
Check for correct spoke
tension. Check the minimum
thickness and if necessary
exchange the brake disc.
Use separate brake discs for
carbon and sinter pads
Exchange the brake pads
Check mounting. Open
compensating reservoir
and discharge overpressure
as necessary. Loosen the
fixing screws on the brake
caliper – pump the pads
onto the brake disc – with
the hand brake lever pulled
on retighten the screws
on the brake caliper
Cleaning with brake
cleaner or alcohol
Press back the pads
manually
Exchange pads (Page 31)