NSi Industries ELC74 - Manual (Page 8)

6
1.3 SET DAYLIGHT SAVINGS
Use the + and - keys to modify the flashing item .
Use the NEXT key advance to the next flashing item
If NO daylight savings adjustment needed, press the
PROGRAM key to bypass and go to next mode .
If daylight savings adjustment needed, select YES with
+ or – keys .
Set SPR (spring) dates by choosing Month (MAR), day
(SUN), and week (2) .
Set FALL dates by choosing Month (NOV), day (SUN),
and week (1) .
Press the PROGRAM key to go to next mode .
2.0 CONF MODE
Configuration mode is used for changing the clock
format, selecting stagger up, setting the lengths of the
4 durations and for programming the on/off times of
the 4 duty cycle patterns .
Press the PROGRAM key to bypass and go to next
mode .
Press the NEXT key to go to the first setting .
2.1 SET CLOCK FORMAT
Use the NEXT key skip clock format .
Use the + and - keys to modify the flashing item .
Set 12 HR (AM/PM) or 24 HR (00:00-23:59) clock
format .
Use the NEXT key advance .
2.2 SET STAGGER START-UP
Use the NEXT key skip stagger .
Use the + and - keys to modify the flashing NO to the
stagger time .