Pyromation Series 610 1_16 DIN - Manual (Page 93)

1 /
4
-DIN, 1 /
8
-DIN & 1 /
16
- DIN Controllers & Indicators - Product Manual
Parameter Lower
Display
Upper
Display Description Default
Value
When
Visible
Retransmit
Output 3 Scale
maximum + $ 
to
 
Display value where output is maximum
Range
max 0,!=
+!/- or
+!/)
Retransmit
Output 3 Scale
minimum + '  to 
Display value where output is minimum
Range min 0,!=
+!/- or
+!/)
C 
PV is visible in Operator
mode
=-  PV not visible in Operator
mode
Display
Strategy
=,@
- "  Displays
- "
in Operator
mode when Limit Output is
not active
C  Always
-3% ASCII
Mm C
Modbus with Even Parity
Comms
Protocol
Mm   Modbus with Odd Parity
Mm C  @C =
+ 

.

1.2 kbps

.

2.4 kbps

.

4.8 kbps

.

9.6 kbps
Bit rate  1=

.

19.2 kbps

.

@C =
+ 
 A unique address for each
instrument between 1 to 255
(Modbus), or 1 to 99 (Ascii)

@C =
+ 
r_  o 3 C
r_  Ww
Always
3' N   to   Always
 Modbus with no parity
Mm  
)+ /
Communica-
tions Address
==+
Read only. Comms
writes ignored Communica-
tions Write
Enable
Read / Write. Writing via
Comms is possible
r_ Ww
Configuration
Mode Lock
Code
Notes:
Option Slot 1 is a fixed Limit Relay output. A Digital Input module, if fitted to Option Slot A
will duplicate the function of the front Reset key . As these functions cannot be
changed, configuration menus are not required.
Alarm parameters marked * are repeated in Setup Mode.
CAUTION:
Process Variable Offset modifies the measured value to compensate for probe
errors. Positive values increase the reading, negative values are subtracted. This
parameter is effectively, a calibration adjustment and MUST be used with care.
Page 88
P6700, P8700& P4700 Model Group 59305, Issue 6 – March 2006