Brother MFC-495CW - Manual (Page 24)

Chapter 1
8
LCD screen
1
The LCD shows the current machine status
when the machine is idle.
1 Wireless Status
A four level indicator shows the current
wireless signal strength if you are using a
wireless connection.
2 Memory Status
Lets you see the available memory in the
machine.
3 Ink indicator
Lets you see the available ink volume.
4 Current Receive Mode
Lets you see the current receive mode.
„ Fax (Fax only)
„ F/T (Fax/Tel)
„ TAD (External TAD)
„ Mnl (Manual)
5 Faxes in memory
Shows how many received faxes are in the
memory.
Basic Operations
1
The following steps show how to change a
setting in the machine. In this example the
Mode Timer setting is changed from
2 minutes to 30 seconds.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Mode Timer.
d
Press d or c to choose 30Secs.
Press OK.
You can see the current setting on the
LCD:
e
Press Stop/Exit.
0 Max
Fax Fax Fax
12:45 12:45 12:45
12.21.2009 12.21.2009 12.21.2009
Mem. Mem. Mem.
1 2 3 4
5
General Setup General Setup
MENU
Mode Timer Mode Timer
Paper Type Paper Type
30Secs 30Secs
Plain Paper Plain Paper
Letter
Letter
Off Off
Paper Size Paper Size
Volume
Volume
Auto Daylight Auto Daylight
Select & Press OK
General Setup General Setup
MENU
Mode Timer Mode Timer
Paper Type Paper Type
30Secs 30Secs
Plain Paper Plain Paper
Letter
Letter
Off Off
Paper Size Paper Size
Volume
Volume
Auto Daylight Auto Daylight
Select & Press OK