Electrolux EXM18HV1WE - Manual (Page 8)

8
Remote Control Description
Turbo Button
Press this button in COOL or HEAT mode to put
the fan into the high speed Turbo mode and the air
conditoner will work at maximum power.
Press again to cancel this function.
X-Fan Button
In Cooling and Dehumidification mode, press the
X-Fan button to active the Self-Cleaning. After
the unit is turned off, the indoor fan will continue
operation for 10 minutes to dry the indoor unit and
prevent bacteria and mildew from growing.
Timer On Button
Press this button to set the start time.
Timer Off Button
Press this button to set the stop time.
Swing Button:
Press this button, the louver will swing up and
down automatically. Press again to cancel it and
the louver will stay at its last position.
I Feel Button:
Press this button, the remote control will send the
temperature information to the indoor unit every
2 minutes. The unit will operate to reach the set
temperature at the location of remote control.
Presss again to cancel this function.
Control Button:
Forward backward
Press the button to increase the temperature
setting.
Press the button to decrease the temperature
setting.
In Timer On/Off or Clock functions, use these
buttons to set the clock or timer adjustment.
Clock Button:
Press this button and the Clock symbol will
blink. You can press Control buttons and to
set the time you want.
Temp (Temperature) Button
Press this button to change the remote control
display of the set temperature to the room
temperature.
Eco (Economy) Button
Press this button to start the Eco operation.
This is ideal for the users to use while sleeping.
Press again to cancel the function.
Note:
Under heating mode, press Temp and Clock
buttons to turn on the function of heating the
indoor room temperature to 8°C.
AUTO DEHUMIDIFY FAN COOL HEAT
ON/OFF Button
Press this button to turn the air conditioner
ON or OFF.
Mode Button
by pressing this button, AUTO, DEHUMIDIFY,
FAN, COOL, and HEAT (COOL only model
has no HEAT feature) mode can be selected
progressively.
AUTO mode is default while power on.
Under AUTO mode, the initial value would not be
displayed, and it will run in the desirable Temp.;
Under HEAT mode, the initial value is 28°C;
Under other modes, the initial value is 25°C.
Light Button
Press this button to switch the indicating lights
of the indoor unit ON or OFF.
The normal condition at start up is ON.
Fan Button
by pressing this button, Auto, Low, Medium and
High speed can be progressively selected.
When the unit is turned on, Auto fan speed is
the default.
In DEHUMIDIFY mode, the fan speed is fixed at
Low speed.