HP StorageWorks XP10000 Disk Array - Manual (Page 163)

Displays the Set LUSE confirmation pane ( Figure 86 ). You can confirm whether or not you want to
continue the operation to create a LUSE volume. For more information, see Creating LUSE volumes .
• Release LUSE Volume
Displays the Release LUSE confirmation pane (
Figure 87 ). You can confirm whether or not you want to
continue the operation to release a LUSE volume. For more information, see Releasing LUSE volumes .
• Reset LUSE Volume
Displays the Reset LUSE confirmation pane (
Figure 88 ). You can confirm whether or not you want to
continue the operation to release an unregistered LUSE volume. For more information, see Resetting
unregistered LUSE volumes .
• Concatenation List
Displays the Concatenation List pane (
Figure 89 ). For more information, see Viewing concatenated
parity groups .
Set LUSE Confirmation pane
When you right-click the free LDEVs you want to form the LUSE volume in the LDEV Information table, and
select Set LUSE Volume, the Set LUSE Confirmation pane appears. You can verify that the LDEVs listed in
the confirmation pane are the ones you want to create a LUSE volume.
Figure 86 Set LUSE Confirmation pane
•
LUSE components list
Displays information about LDEVs that constitute the LUSE volume.
• LDEV: LDEV icon, CU number, and LDEV number.
NOTE:
If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For more
information about external LUs, see the HP StorageWorks External Storage XP user guide .
NOTE:
If an LDEV number ends with V (for example, 00:01V), the LDEV is a virtual volume (V-VOL). For
more information about V-VOLs, see the HP StorageWorks Snapshot XP user guide .
HP StorageWorks LUN Configuration and Security Manager XP user guide for the
XP12000/XP10000/SVS200
163