HP 2000SA G2-Modular-Smart-Array - Manual (Page 48)

Table 16 Possible log messages
Log
level
Log action statement Log impact statement Log message Category ID
0 VAAI capable: YN, Claimed: YN -
Device: naa.xxaxx INFO 0
0 VAAI unclaiming device naa.xxaxx INFO 1
0 Unregistering logging. INFO 2
1 VAAI commands supported: <Block
Zeroing>, <ATS>, <and Copy> on
device: naa.xxaxx INFO 3
2 pp-VAAI-SENSE-MODE
vmkCmd.status (H-D-P): XX-XX-XX INFO 4
Sense(key-asc-ascq) XX-XX-XX
pp-VAAI-BLOCK COPY
vmkCmd.status (H-D-P): XX-XX-XX
Sense(key-asc-ascq) XX-XX-XX
2 pp-CDB Response Data
0000: XX XX XX XX XX XX XX XX INFO 5
XX XX XX XX XX XX XX XX
| <cccccccccccccc> |
pp-VAAI-MODESENSE RSP DATA
0000: XX XX XX XX XX XX XX XX
XX XX XX XX XX XX XX XX
| <cccccccccccccc> |
pp-VAAI-MODESENSE RSP DATA
0010: XX XX XX XX XX XX XX XX
XX XX XX XX XX XX XX XX
| <cccccccccccccc> |
0 new device: naa.xxaxx (VV : PPP:
FFF)
DeviceClass: 0 INFO 6
0 device NOT a volume...pass it up
DeviceClass: <x> DEBUG 7
2 IN DEBUG 8
3 OUT — b DEBUG 9
3 init_module IN DEBUG 10
3 OUT – b DEBUG 11
3 mfg:[cccc]
model:[cccccccccccccccc]
rev:[cccc] DEBUG 12
3 FOUND UNRECOGNIZED HP model.... DEBUG 13
3 No VAAI support
for HP P2000
Arrays. FAILURE with
vmk_ScsiCreateCommand ( ) FAILURE 14
3 Logging for more debug CDB
content. DEBUG 15
48 HP P2000 Software Plug-in for VMware VAAI vSphere