HP 2000SA G2-Modular-Smart-Array - Manual (Page 6)

The following image is an example of the Setup tab for the P2000 G3 SAS MSA array.
Getting started
When accessing the MSA Software Support/Documentation DVD to initially install a system, do
the following:
1.
Read the getting started information in the Home tab.
2. Read release note information by selecting the Readme link in the left pane.
3. Select the P2000 G3 or MSA2000/MSA2000 G2 tab.
4. Select to the Setup tab and then click the link for your MSA model in the left pane. An
installation checklist for that MSA model is displayed. For more information, see
“Installing a
new MSA system” (page 7) .
Tabs and menus available for each MSA platform model
•
Setup—Initial setup and configuration instructions and checklists ( “Installing a new MSA system”
(page 7) )
•
Documents—User documents, including racking and installation instructions, user guides, and
reference manuals (
“Obtaining user documents” (page 7) )
•
Software—Software downloads, including hardware drivers and Microsoft hotfixes ( “Obtaining
drivers” (page 7) )
•
Firmware—MSA array controller enclosure and drive enclosure firmware ( “Obtaining firmware”
(page 7) )
•
Tools—Software tools, including the HP MSA Device Discovery Tool, HP P2000 MSA Firmware
Update Tool, and HP P2000 MSA Performance Tool (
“Obtaining and running software tools”
(page 8) )
•
Service—Product registration and support ( “Registering the MSA and getting service” (page 8) )
•
License—End User License Agreement
6 HP P2000/MSA2000 Software Support / Documentation DVD