HP XP20000XP24000 Disk Array - Manual (Page 75)

Figure 35 The Connected Host Window (Reports Display)
The displayed items on the Connected Host dialog box are as follows:
• LDKC drop-down list:
You can select the LDKC for which information is to be displayed from the drop-down list.
• CU drop-down list:
You can select the CU for which information is to be displayed from the drop-down list.
• Connected Host list:
Following items are displayed in the Connected Host list:
• No.
Indicates the sequential number of the list.
• Type/Model
Indicates the type and the model number of a host (or a channel extender).
• SEQNUMBER
Indicates the node ID of a host (or a channel extender).
• LPAR
Indicates a logical partition number of a host.
• Vendor
Indicates the vendor of the host. This column can display FJT (Fujitsu), IBM, HTC (HP), and
CNT(Ex). If CNT(Ex) appears, the table row indicates the type, the model number, and the
node ID of a channel extender.
Detail Information Dialog Box
If you select a LUSE volume from the list in the LUN dialog box (see Figure 33 on page 72) or the LDEV
dialog box (see Figure 34 on page 73), and right-click, the Detail Information command is displayed.
XP24000 Remote Web Console User’s Guide 75