HP Laserjet p3010 - Manual (Page 47)

Figure 3-12 Device Security Settings screen (2 of 2)
6
8
7
9
10
11
Table 3-7 Configure Security Settings
Callout Area on the screen Information or capability that the area provides
1 Device Password Use the Device Password section to set the EWS admin password using 16 or fewer
characters. The section contains the following fields:
● Old Password–The Old Password field is always visible. The correct password
is required in this field before changing or disabling the password. If the device
password is not configured, the Old Password field will display Not
Configured in place of the text box.
● New Password–The New Password field is always visible. Enter a new
password in this field to configure the password or to change the configured
password (if the Old Password field is populated with the correct password). The
password is no longer configured if settings are applied with the field left blank.
● Verify Password–The Verify Password field is always visible. It requires users
to repeat the password from the new password field in order to change the current
password.
ENWW Security 37