2 server unpacking and installation, Factory integrated rp54xx cabinet installation – HP 9000 rp5400 Servers User Manual
Page 15
2 Server Unpacking and Installation
Factory Integrated rp54xx Cabinet Installation
A factory integrated server is one in which the rp54xx server and associated components are
pre-assembled and shipped from the factory already installed in a Hewlett-Packard E-Series
cabinet. Factory integrated systems reduce the amount of time required to set-up and begin
server operation.
1.
Carefully remove the carton and anti-static bag from the pallet.
2.
Remove the front two (2) L-brackets. Retain the 1/2-inch bolts for later use.
NOTE:
As viewed from the front, one bracket is located on each side at the base of the
cabinet near the front.
3.
At the rear of the cabinet:
a.
Open the door.
b.
Remove the anti-tip foot by removing and retaining the two (2) 1/2-inch bolts.
c.
Remove the two (2) L-brackets (revealed by removing the anti-tip foot).
Factory Integrated rp54xx Cabinet Installation
15