Displaying compatible pav device parameters, Displaying compatible pav device – HP StorageWorks XP Remote Web Console Software User Manual
Page 59
Figure 52 HCD Device Parameters
Displaying Compatible PAV Device Parameters
You can display the device parameters using HCD to determine if a specific device is eligible for
Dynamic Compatible PAV management by WLM. To display the device parameters:
1.
Starting from the I/O Device List dialog box (see
), select the desired
device by entering a slash (/) by the device number. In our example, we have selected device
8101.
2.
After you select the desired device, you are prompted to select the desired action (see
). Select option 8 to open the View Device Definition dialog box.
3.
Review the information on the View Device Definition dialog box (see
),
and press Enter to continue.
4.
Select the processor definition on the View Device / Processor Definition dialog box (see
).
5.
Review the candidate list for this device (see
), and press Enter to continue.
6.
On the View Device / OS Configuration Definitions dialog box (see
),
select the OS configuration.
7.
The View Device Parameter / Feature Definition dialog box (see
) displays the WLMPAV device parameters.
Displaying Compatible PAV Device Parameters
59