HP ProLiant ML310 G5p Server - Manual (Page 44)

Hardware options installation 44
7. Connect the cable to the cache module.
8. Install the battery pack.
9. Route the cable.
10. Install the access panel (on page 18 ).
IMPORTANT: Be sure that the panel is locked into place securely before powering up the server.
11. Close the tower bezel.
12. Power up the server (on page 16 ).
HP Trusted Platform Module option
Use these instructions to install and enable a TPM on a supported server. This procedure includes three
sections:
1. Installing the Trusted Platform Module board (on page 45 ).
2. Retaining the recovery key/password (on page 46 ).