Management agents, Hp systems insight manager, Usb support – HP ProLiant ML310 G5p Server User Manual
Page 58: Internal usb functionality
Software and configuration utilities 58
Management Agents
Management Agents provide the information to enable fault, performance, and configuration management.
The agents allow easy manageability of the server through HP SIM software, and third-party SNMP
management platforms. Management Agents are installed with every SmartStart assisted installation or can
be installed through the HP PSP. The Systems Management homepage provides status and direct access to
in-depth subsystem information by accessing data reported through the Management Agents. For additional
information, refer to the Management CD in the HP ProLiant Essentials Foundation Pack or the HP website
HP Systems Insight Manager
HP SIM is a web-based application that allows system administrators to accomplish normal administrative
tasks from any remote location, using a web browser. HP SIM provides device management capabilities that
consolidate and integrate management data from HP and third-party devices.
IMPORTANT:
You must install and use HP SIM to benefit from the Pre-Failure Warranty for
processors, SAS and SATA hard drives, and memory modules.
For additional information, refer to the Management CD in the HP ProLiant Essentials Foundation Pack or the
HP SIM website
USB support
HP provides both standard USB 2.0 support and legacy USB 2.0 support. Standard support is provided by
the OS through the appropriate USB device drivers. Before the OS loads, HP provides support for USB
devices through legacy USB support, which is enabled by default in the system ROM.
Legacy USB support provides USB functionality in environments where USB support is not available normally.
Specifically, HP provides legacy USB functionality for the following:
•
POST
•
RBSU
•
Diagnostics
•
DOS
•
Operating environments which do not provide native USB support
Internal USB functionality
An internal USB connector is available for use with security key devices and USB drive keys. This solution
provides for use of a permanent USB key installed in the internal connector, avoiding issues of clearance on
the front of the rack and physical access to secure data.
For additional security, external USB functionality can be disabled through RBSU. Disabling external USB
support in RBSU disables the USB connectors on the local I/O cable. Internal USB functionality is unaffected.